[TOC] 1.集群架構 | 主機名 | 角色 | IP地址 | | : : | : : | : : | | hdss7 21.host.com | flannel | 10.4.7.21 | | hdss7 22.host.com | flannel | 10.4.7.22 | 部署方法以hdss ...
目錄
1.集群架構
| 主機名 | 角色 | IP地址 |
|---|---|---|
| hdss7-21.host.com | flannel | 10.4.7.21 |
| hdss7-22.host.com | flannel | 10.4.7.22 |
部署方法以hdss7-21.host.com為例
1.1.下載軟體，解壓，做軟鏈接
[root@hdss7-21 ~]# cd /opt/src/
[root@hdss7-21 src]# wget https://github.com/coreos/flannel/releases/download/v0.11.0/flannel-v0.11.0-linux-amd64.tar.gz
[root@hdss7-21 src]# mkdir /opt/flannel-v0.11.0
[root@hdss7-21 src]# tar xf flannel-v0.11.0-linux-amd64.tar.gz -C /opt/flannel-v0.11.0/
[root@hdss7-21 src]# ln -s /opt/flannel-v0.11.0/ /opt/flannel
1.2.創建目錄
[root@hdss7-21 src]# /opt/flannel
[root@hdss7-21 flannel]# mkdir /opt/flannel/cert
1.3.拷貝證書文件
[root@hdss7-21 flannel]# cd cert
[root@hdss7-21 cert]# scp hdss7-200:/opt/certs/ca.pem .
[root@hdss7-21 cert]# scp hdss7-200:/opt/certs/client.pem .
[root@hdss7-21 cert]# scp hdss7-200:/opt/certs/client-key.pem .
1.4.創建配置
[root@hdss7-21 cert]# cd ..
[root@hdss7-21 flannel]# vi subnet.env
FLANNEL_NETWORK=172.7.0.0/16
FLANNEL_SUBNET=172.7.21.1/24
FLANNEL_MTU=1500
FLANNEL_IPMASQ=false
1.5.創建啟動腳本
[root@hdss7-21 flannel]# vi flanneld.sh
#!/bin/sh
./flanneld \
--public-ip=10.4.7.21 \
--etcd-endpoints=https://10.4.7.12:2379,https://10.4.7.21:2379,https://10.4.7.22:2379 \
--etcd-keyfile=./cert/client-key.pem \
--etcd-certfile=./cert/client.pem \
--etcd-cafile=./cert/ca.pem \
--iface=eth0 \
--subnet-file=./subnet.env \
--healthz-port=2401
1.6.授權和創建日誌目錄
[root@hdss7-21 flannel]# chmod +x flanneld.sh
[root@hdss7-21 flannel]# mkdir -p /data/logs/flanneld
1.7.創建supervisor配置
[root@hdss7-21 flannel]# vi /etc/supervisord.d/flannel.ini
[program:flanneld-7-21]
command=/opt/flannel/flanneld.sh ; the program (relative uses PATH, can take args)
numprocs=1 ; number of processes copies to start (def 1)
directory=/opt/flannel ; directory to cwd to before exec (def no cwd)
autostart=true ; start at supervisord start (default: true)
autorestart=true ; retstart at unexpected quit (default: true)
startsecs=30 ; number of secs prog must stay running (def. 1)
startretries=3 ; max # of serial start failures (default 3)
exitcodes=0,2 ; 'expected' exit codes for process (default 0,2)
stopsignal=QUIT ; signal used to kill process (default TERM)
stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10)
user=root ; setuid to this UNIX account to run the program
redirect_stderr=true ; redirect proc stderr to stdout (default false)
stdout_logfile=/data/logs/flanneld/flanneld.stdout.log ; stderr log path, NONE for none; default AUTO
stdout_logfile_maxbytes=64MB ; max # logfile bytes b4 rotation (default 50MB)
stdout_logfile_backups=4 ; # of stdout logfile backups (default 10)
stdout_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0)
stdout_events_enabled=false ; emit events on stdout writes (default false)
2.flannel host-gw模型（三選一）
[root@hdss7-21 etcd]# ./etcdctl set /coreos.com/network/config '{"Network": "172.7.0.0/16", "Backend": {"Type": "host-gw"}}'
{"Network": "172.7.0.0/16", "Backend": {"Type": "host-gw"}}
驗證：
[root@hdss7-21 etcd]# ./etcdctl get /coreos.com/network/config
{"Network": "172.7.0.0/16", "Backend": {"Type": "host-gw"}}
2.1.啟動服務並檢查
[root@hdss7-21 flannel]# supervisorctl update
[root@hdss7-21 flannel]# supervisorctl status
3.flannel vxlan模型（三選一）
1.supervisor stop flanneld-7-[21.22]
2.刪除host-gw模型創建的路由
route del -net 172.7.21.0/24 gw 10.4.7.21 hdss7-22.host.com上
route del -net 172.7.22.0/24 gw 10.4.7.22 hdss7-21.host.com上
3.在etcd修改
./etcdctl get /coreos.com/network/config
./etcdctl rm /coreos.com/network/config
./etcdctl set /coreos.com/network/config '{"Network": "172.7.0.0/16", "Backend": {"Type": "VxLAN"}}'
4.supervisor start flanneld-7-[21.22]
4.flannel 直接路由模型（三選一）
'{"Network": "172.7.0.0/16", "Backend": {"Type": "VxLAN","Directrouting": true}}'
