crosstool-ng-1.22.0搭建開發環境

来源:http://www.cnblogs.com/zhuixinshaonian/archive/2017/09/12/7509290.html
-Advertisement-
Play Games

Ubuntu16.04無法安裝libtool，只能在Ubuntu14.04以下版本安裝。 cp 下載/crosstool-ng-1.22.0.tar.bz2 /home/hou/ tar -xvf crosstool-ng-1.22.0.tar.bz2 cd crosstool-ng 安裝一些必要的... ...


   

Ubuntu16.04無法安裝libtool，只能在Ubuntu14.04以下版本安裝。

cp 下載/crosstool-ng-1.22.0.tar.bz2 /home/hou/

tar -xvf crosstool-ng-1.22.0.tar.bz2

cd crosstool-ng

   

安裝一些必要的軟體：

apt install gperf bison flex texinfo help2man gawk libtool libncurses5-dev

Make

./configure --prefix=/home/hou/arm/crosstool-ng-1.22.0_install

   

屏幕剪輯的捕獲時間: 2016/5/22 11:18

sudo make install

   

   

屏幕剪輯的捕獲時間: 2016/5/22 11:20

在~/.bashrc 配置ct-ng命令的環境變數

目錄：

love-xin :: ~/arm/crosstool-ng-1.22.0_build % ct-ng list-steps

Available build steps, in order:

- libc_check_config

- companion_libs_for_build

- binutils_for_build

- companion_libs_for_host

- binutils_for_host

- cc_core_pass_1

- kernel_headers

- libc_start_files

- cc_core_pass_2

- libc

- cc_for_build

- cc_for_host

- libc_post_cc

- companion_libs_for_target

- binutils_for_target

- debug

- test_suite

- finish

Use "<step>" as action to execute only that step.

Use "+<step>" as action to execute up to that step.

Use "<step>+" as action to execute from that step onward.

love-xin :: ~/arm/crosstool-ng-1.22.0_build % ct-ng list-samples

Status Sample name

LN config

MKDIR config.gen

IN config.gen/arch.in

IN config.gen/kernel.in

IN config.gen/cc.in

IN config.gen/binutils.in

IN config.gen/libc.in

IN config.gen/debug.in

[G..] alphaev56-unknown-linux-gnu

[G..] alphaev67-unknown-linux-gnu

[G..] arm-bare_newlib_cortex_m3_nommu-eabi

[G..] arm-cortex_a15-linux-gnueabi

[G.X] arm-cortexa5-linux-uclibcgnueabihf

[G..] arm-cortex_a8-linux-gnueabi

[G.X] arm-cortexa9_neon-linux-gnueabihf

[G..] armeb-unknown-eabi

[G..] armeb-unknown-linux-gnueabi

[G..] armeb-unknown-linux-uclibcgnueabi

[G..] arm-unknown-eabi

[G..] arm-unknown-linux-gnueabi

[G.X] arm-unknown-linux-musleabi

[G..] arm-unknown-linux-uclibcgnueabi

[G.X] arm-unknown-linux-uclibcgnueabihf

[G..] armv6-rpi-linux-gnueabi

[G..] armv7-rpi2-linux-gnueabihf

[G..] avr

[G..] i586-geode-linux-uclibc

[G..] i586-mingw32msvc,i686-none-linux-gnu

[G..] i686-nptl-linux-gnu

[G.X] i686-w64-mingw32

[G..] m68k-unknown-elf

[G..] m68k-unknown-uclinux-uclibc

[G..] mips64el-n32-linux-uclibc

[G..] mips64el-n64-linux-uclibc

[G..] mips-ar2315-linux-gnu

[G..] mipsel-sde-elf

[G..] mipsel-unknown-linux-gnu

[G..] mips-malta-linux-gnu

[G..] mips-unknown-elf

[G..] mips-unknown-linux-uclibc

[G.X] i686-w64-mingw32,nios2-spico-elf

[G..] powerpc-405-linux-gnu

[G..] powerpc64-unknown-linux-gnu

[G..] powerpc-860-linux-gnu

[G..] powerpc-e300c3-linux-gnu

[G..] powerpc-e500v2-linux-gnuspe

[G..] powerpc-unknown-linux-gnu

[G..] powerpc-unknown-linux-uclibc

[G..] powerpc-unknown_nofpu-linux-gnu

[G.X] s390-ibm-linux-gnu

[G..] s390x-ibm-linux-gnu

[G..] sh4-unknown-linux-gnu

[G..] sparc-unknown-linux-gnu

[G.X] x86_64-w64-mingw32,x86_64-pc-linux-gnu

[G..] x86_64-unknown-linux-gnu

[G..] x86_64-unknown-linux-uclibc

[G.X] x86_64-w64-mingw32

[G..] xtensa-unknown-linux-uclibc

L (Local) : sample was found in current directory

G (Global) : sample was installed with crosstool-NG

X (EXPERIMENTAL): sample may use EXPERIMENTAL features

B (BROKEN) : sample is currently broken

love-xin :: ~/arm/crosstool-ng-1.22.0_build %

在後續的配置（和編譯）之後，可以通過show-tuple，去查看到當前配置的交叉編譯器是啥樣的

love-xin :: ~/arm/crosstool-ng-1.22.0_build % ct-ng show-tuple

arm-cortexa9_neon-linux-gnueabihf

查看當前有哪些（預設的）示例配置，可以用：

ct-ng list-samples

查看單個的某個示例配置的核心參數，用：

ct-ng show-<sample>

love-xin :: ~/arm/crosstool-ng-1.22.0_build % ct-ng show-arm-cortexa9_neon-linux-gnueabihf

IN config.gen/arch.in

IN config.gen/kernel.in

IN config.gen/cc.in

IN config.gen/binutils.in

IN config.gen/libc.in

[G.X] arm-cortexa9_neon-linux-gnueabihf

OS : linux-4.3

Companion libs : gmp-6.0.0a mpfr-3.1.3 mpc-1.0.3 expat-2.1.0 ncurses-6.0

binutils : binutils-2.22

C compilers : gcc | 5.2.0

Languages : C,C++

C library : glibc-2.22 (threads: nptl)

Tools : gdb-7.10

love-xin :: ~/arm/crosstool-ng-1.22.0_build %

   

   

   

屏幕剪輯的捕獲時間: 2016/5/22 12:34

   

iTop4412是使用cortex-a9，所以按照這個配置就OK，上面是軟體要求。

可以直接去調用此配置了：

ct-ng arm-cortexa9-linux-gnueabi

   

   

屏幕剪輯的捕獲時間: 2016/5/22 13:08

接下來，你就可以去進入配置：

ct-ng menuconfig

   

源碼包下載保存路徑

Paths and misc options
(${HOME}/arm/src) Local tarballs directory

工作路徑

一般使用預設配置

Paths and misc options
(${CT_TOP_DIR}/.build) Working directory

目標安裝路徑

   

Paths and misc options
(${HOME}/arm/x-tools/${CT_TARGET}) Prefix directory

一些詳細的配置請參考網站：

crosstool-ng詳解

   

src下麵主要用到linux、gcc兩個安裝包，這兩個包比較大，可以提前下載好。其它的包自動下載。

   

配置好後，保存退出。執行ct-ng build編譯

   

   

屏幕剪輯的捕獲時間: 2016/5/22 15:06

編譯詳細過程：

╭─hou@love-xin ~/arm/crosstool-ng-1.22.0_build

╰─$ ct-ng build

[INFO ] Performing some trivial sanity checks

[INFO ] Build started 20160522.191913

[INFO ] Building environment variables

[EXTRA] Preparing working directories

[EXTRA] Installing user-supplied crosstool-NG configuration

[EXTRA] =================================================================

[EXTRA] Dumping internal crosstool-NG configuration

[EXTRA] Building a toolchain for:

[EXTRA] build = x86_64-pc-linux-gnu

[EXTRA] host = x86_64-pc-linux-gnu

[EXTRA] target = arm-cortexa9_neon-linux-gnueabihf

[EXTRA] Dumping internal crosstool-NG configuration: done in 0.10s (at 00:08)

[INFO ] =================================================================

[INFO ] Retrieving needed toolchain components' tarballs

[EXTRA] Retrieving 'glibc-libidn-2.22'

[INFO ] Retrieving needed toolchain components' tarballs: done in 362.72s (at 06:11)

[INFO ] =================================================================

[INFO ] Extracting and patching toolchain components

[INFO ] Extracting and patching toolchain components: done in 2.59s (at 06:13)

[INFO ] Saving state to restart at step 'libc_check_config'...

[INFO ] Saving state to restart at step 'companion_libs_for_build'...

[INFO ] =================================================================

[INFO ] Installing ncurses for build

[EXTRA] Configuring ncurses

[EXTRA] Building ncurses

[EXTRA] Installing ncurses

[INFO ] Installing ncurses for build: done in 39.95s (at 06:53)

[INFO ] Saving state to restart at step 'binutils_for_build'...

[INFO ] Saving state to restart at step 'companion_libs_for_host'...

[INFO ] =================================================================

[INFO ] Installing GMP for host

[EXTRA] Configuring GMP

[EXTRA] Building GMP

[EXTRA] Installing GMP

[INFO ] Installing GMP for host: done in 47.59s (at 07:42)

[INFO ] =================================================================

[INFO ] Installing MPFR for host

[EXTRA] Configuring MPFR

[EXTRA] Building MPFR

[EXTRA] Installing MPFR

[INFO ] Installing MPFR for host: done in 36.57s (at 08:19)

[INFO ] =================================================================

[INFO ] Installing ISL for host

[EXTRA] Configuring ISL

[EXTRA] Building ISL

[EXTRA] Installing ISL

[INFO ] Installing ISL for host: done in 33.91s (at 08:53)

[INFO ] =================================================================

[INFO ] Installing MPC for host

[EXTRA] Configuring MPC

[EXTRA] Building MPC

[EXTRA] Installing MPC

[INFO ] Installing MPC for host: done in 16.35s (at 09:09)

[INFO ] =================================================================

[INFO ] Installing expat for host

[EXTRA] Configuring expat

[EXTRA] Building expat

[EXTRA] Installing expat

[INFO ] Installing expat for host: done in 7.11s (at 09:16)

[INFO ] Saving state to restart at step 'binutils_for_host'...

[INFO ] =================================================================

[INFO ] Installing binutils for host

[EXTRA] Configuring binutils

[EXTRA] Building binutils

[EXTRA] Installing binutils

[EXTRA] Installing ld wrapper

[INFO ] Installing binutils for host: done in 199.40s (at 12:37)

[INFO ] Saving state to restart at step 'cc_core_pass_1'...

[INFO ] =================================================================

[INFO ] Installing pass-1 core C gcc compiler

[EXTRA] Configuring core C gcc compiler

[EXTRA] Building gcc

[EXTRA] Installing gcc

[EXTRA] Housekeeping for final gcc compiler

[INFO ] Installing pass-1 core C gcc compiler: done in 538.26s (at 21:46)

[INFO ] Saving state to restart at step 'kernel_headers'...

[INFO ] =================================================================

[INFO ] Installing kernel headers

[EXTRA] Installing kernel headers

[EXTRA] Checking installed headers

[INFO ] Installing kernel headers: done in 11.64s (at 22:16)

[INFO ] Saving state to restart at step 'libc_start_files'...

[INFO ] =================================================================

[INFO ] Installing C library headers & start files

[EXTRA] Configuring C library

[EXTRA] Installing C library headers

[EXTRA] Installing C library start files

[INFO ] Installing C library headers & start files: done in 23.37s (at 22:54)

[INFO ] Saving state to restart at step 'cc_core_pass_2'...

[INFO ] =================================================================

[INFO ] Installing pass-2 core C gcc compiler

[EXTRA] Configuring core C gcc compiler

[EXTRA] Building gcc

[EXTRA] Installing gcc

[EXTRA] Housekeeping for final gcc compiler

[INFO ] Installing pass-2 core C gcc compiler: done in 657.92s (at 34:06)

[INFO ] Saving state to restart at step 'libc'...

[INFO ] =================================================================

[INFO ] Installing C library

[EXTRA] Configuring C library

[EXTRA] Building C library

[EXTRA] Installing C library

[EXTRA] Configuring C library localedef

[EXTRA] Building C library localedef

[EXTRA] Installing C library locales

[INFO ] Installing C library: done in 861.70s (at 48:47)

[INFO ] Saving state to restart at step 'cc_for_build'...

[INFO ] Saving state to restart at step 'cc_for_host'...

[INFO ] =================================================================

[INFO ] Installing final gcc compiler

[EXTRA] Configuring final gcc compiler

[EXTRA] Building final gcc compiler

[EXTRA] Installing final gcc compiler

[EXTRA] Housekeeping for final gcc compiler

[INFO ] Installing final gcc compiler: done in 902.17s (at 64:39)

[INFO ] Saving state to restart at step 'libc_post_cc'...

[INFO ] Saving state to restart at step 'companion_libs_for_target'...

[INFO ] =================================================================

[INFO ] Installing expat for target

[EXTRA] Configuring expat

[EXTRA] Building expat

[EXTRA] Installing expat

[INFO ] Installing expat for target: done in 6.22s (at 66:33)

[INFO ] =================================================================

[INFO ] Installing ncurses for target

[EXTRA] Configuring ncurses

[EXTRA] Building ncurses

[EXTRA] Installing ncurses

[INFO ] Installing ncurses for target: done in 49.44s (at 67:22)

[INFO ] Saving state to restart at step 'binutils_for_target'...

[INFO ] Saving state to restart at step 'debug'...

[INFO ] =================================================================

[INFO ] Installing cross-gdb

[EXTRA] Configuring cross-gdb

[EXTRA] Building cross-gdb

[EXTRA] Installing cross-gdb

[EXTRA] Installing '.gdbinit' template

[INFO ] Installing cross-gdb: done in 197.27s (at 71:44)

[INFO ] =================================================================

[INFO ] Installing native gdb

[EXTRA] Configuring native gdb

[EXTRA] Building native gdb

[EXTRA] Installing native gdb

[INFO ] Installing native gdb: done in 184.36s (at 74:48)

[INFO ] =================================================================

[INFO ] Installing gdbserver

[EXTRA] Configuring gdbserver

[EXTRA] Building gdbserver

[EXTRA] Installing gdbserver

[INFO ] Installing gdbserver: done in 60.28s (at 75:49)

[INFO ] Saving state to restart at step 'test_suite'...

[INFO ] Saving state to restart at step 'finish'...

[INFO ] =================================================================

[INFO ] Cleaning-up the toolchain's directory

[INFO ] Stripping all toolchain executables

[EXTRA] Installing the populate helper

[EXTRA] Installing a cross-ldd helper

[EXTRA] Creating toolchain aliases

[EXTRA] Removing access to the build system tools

[EXTRA] Removing installed documentation

[INFO ] Cleaning-up the toolchain's directory: done in 3.83s (at 77:27)

[INFO ] Build completed at 20160522.203639

[INFO ] (elapsed: 77:26.35)

[INFO ] Finishing installation (may take a few seconds)...

[77:27] / % ╭─hou@love-xin ~/arm/crosstool-ng-1.22.0_build

╰─$

添加環境變數：

sudo vim ~/.bashrc

在PATH變數中添加:${HOME}/arm/x-tools/arm-cortexa9_neon-linux-gnueabihf/bin

刷新：

source ~/.bashrc

   

   

屏幕剪輯的捕獲時間: 2016/5/22 21:01

   

love-xin :: ~/arm/crosstool-ng-1.22.0_build » arm-cortexa9_neon-linux-gnueabihf-gcc --version

arm-cortexa9_neon-linux-gnueabihf-gcc (crosstool-NG crosstool-ng-1.22.0) 5.2.0

Copyright © 2015 Free Software Foundation, Inc.

本程式是自由軟體；請參看源代碼的版權聲明。本軟體沒有任何擔保；

包括沒有適銷性和某一專用目的下的適用性擔保。

love-xin :: ~/arm/crosstool-ng-1.22.0_build »

   

為了不影響主機看網頁、玩游戲，當時設置Ubuntu是2G運行記憶體，所以時間有點慢，想要快點可以設置大一點。

   

   

   

   

   

   

   

   

   

   


您的分享是我們最大的動力!

-Advertisement-
Play Games
更多相關文章
  • MongoDB複製集配置
    配置文件 在主節點初始化複製集配置 在主節點上添加從節點 修改節點的優先順序，設置為0則不會被選為主 ...
  • linux 卸載 mongo2.6
    要求：linux 卸載 mongo2.6 版本：linux系統：Ubuntu 16.04 mongo: mongo 2.6.12 1、 查看安裝的mongo版本和服務 # dpkg –l | grep mongo 可以看到，目前有三個和mongodb有關，mongodb，mongodb-client ...
  • Day7 - 重定向、別名、絕對路徑、相對路徑 詳解
    第1章 Linux命令基礎 1.1 習慣 操作前備份，操作後檢查 1.2 簡單目錄結構 一切從根開始，與windows不同 1.3 規則 [root@oldboyedu-40 ~]# [用戶名@主機名 你在哪]# [root@oldboyedu-40 ~]# [用戶名@主機名 你在哪]# 1.4 重 ...
  • [轉]scp用法
    從本地複製到遠程 從遠程複製到本地 說明 ...
  • awk知識點全回顧
    本文目錄：1.awk簡介和基本語法格式2.print和printf格式化輸出3.輸入行的欄位分隔符和行分隔符4.BGEIN和END5.數組6.流程式控制制語句 6.1 條件判斷語句 6.2 while迴圈 6.3 do迴圈 6.4 for迴圈7.更完整的awk程式格式和表達式8.awk中的變數9.awk ...
  • [整理]vimtutor章節小結
    ``` 第一講小結 1. 游標在屏幕文本中的移動既可以用箭頭鍵，也可以使用 hjkl 字母鍵。 h (左移) j (下行) k (上行) l (右移) 2. 欲進入 Vim 編輯器(從命令行提示符)，請輸入：vim 文件名 3. 欲退出 Vim 編輯器，請輸入 :q! 放棄所有改動。 ... ...
  • ubuntu14.04環境下利用docker搭建solrCloud集群
    主要內容： 技術關鍵點：docker17.06.3安裝，docker自製鏡像及相關容器操作，docker分配固定IP及添加埠映射，solrCloud集群部署等 主要思路：在Ubuntu14.04操作系統的宿主機中，安裝docker17.06.3，將宿主機的操作系統製作成docker基礎鏡像，之後使 ...
  • 刪除網路中的本地連接*x等
    1.運行-regedit 打開註冊表 定位到 HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Control Network {4D36E972-E325-11CE-BFC1-08002BE10318} 目錄下 這裡保存著當前網卡配置信息，查找目錄下每個子目錄... ...
一周排行
    -Advertisement-
    Play Games
  • 移動開發（一）：使用.NET MAUI開發第一個安卓APP
    移動開發（一）：使用.NET MAUI開發第一個安卓APP 對於工作多年的C#程式員來說，近來想嘗試開發一款安卓APP，考慮了很久最終選擇使用.NET MAUI這個微軟官方的框架來嘗試體驗開發安卓APP，畢竟是使用Visual Studio開發工具，使用起來也比較的順手，結合微軟官方的教程進行了安卓 ...
  • wpf ToggleButton選中效果和一個登錄界面
    前言 QuestPDF 是一個開源 .NET 庫，用於生成 PDF 文檔。使用了C# Fluent API方式可簡化開發、減少錯誤並提高工作效率。利用它可以輕鬆生成 PDF 報告、發票、導出文件等。 項目介紹 QuestPDF 是一個革命性的開源 .NET 庫，它徹底改變了我們生成 PDF 文檔的方 ...
  • 彈幕樹洞項目功能新增篇
    項目地址 項目後端地址： https://github.com/ZyPLJ/ZYTteeHole 項目前端頁面地址： ZyPLJ/TreeHoleVue (github.com) https://github.com/ZyPLJ/TreeHoleVue 目前項目測試訪問地址： http://tree ...
  • 第27篇 sqlserver2022詳細安裝步驟
    話不多說，直接開乾 一.下載 1.官方鏈接下載： https://www.microsoft.com/zh-cn/sql-server/sql-server-downloads 2.在下載目錄中找到下麵這個小的安裝包 SQL2022-SSEI-Dev.exe，運行開始下載SQL server； 二. ...
  • .NET 開源高性能 MQTT 類庫
    前言 隨著物聯網（IoT）技術的迅猛發展，MQTT（消息隊列遙測傳輸）協議憑藉其輕量級和高效性，已成為眾多物聯網應用的首選通信標準。 MQTTnet 作為一個高性能的 .NET 開源庫，為 .NET 平臺上的 MQTT 客戶端與伺服器開發提供了強大的支持。 本文將全面介紹 MQTTnet 的核心功能 ...
  • Serilog文檔翻譯系列（六） - 可用的接收器、增強器、格式化輸出
    Serilog支持多種接收器用於日誌存儲，增強器用於添加屬性，LogContext管理動態屬性，支持多種輸出格式包括純文本、JSON及ExpressionTemplate。還提供了自定義格式化選項，適用於不同需求。 ...
  • 警惕 Visual Studio 屬性求值副作用導致邏輯不符合預期
    目錄簡介獲取 HTML 文檔解析 HTML 文檔測試參考文章 簡介 動態內容網站使用 JavaScript 腳本動態檢索和渲染數據，爬取信息時需要模擬瀏覽器行為，否則獲取到的源碼基本是空的。 本文使用的爬取步驟如下： 使用 Selenium 獲取渲染後的 HTML 文檔 使用 HtmlAgility ...
  • [使用目前最新版]HybridCLR6.9.0+YooAsset2.2.4實現純C# Unity熱更新方案 (一)
    1.前言 什麼是熱更新 游戲或者軟體更新時，無需重新下載客戶端進行安裝，而是在應用程式啟動的情況下，在內部進行資源或者代碼更新 Unity目前常用熱更新解決方案 HybridCLR，Xlua，ILRuntime等 Unity目前常用資源管理解決方案 AssetBundles，Addressable， ...
  • 在 ASP.NET Core Web API 中使用操作篩選器統一處理通用操作
    本文章主要是在C# ASP.NET Core Web API框架實現向手機發送驗證碼簡訊功能。這裡我選擇是一個互億無線簡訊驗證碼平臺，其實像阿裡雲，騰訊雲上面也可以。 首先我們先去 互億無線 https://www.ihuyi.com/api/sms.html 去註冊一個賬號 註冊完成賬號後，它會送 ...
  • 第28篇 如何.net中實現高效可靠數據同步api
    通過以下方式可以高效，並保證數據同步的可靠性 1.API設計 使用RESTful設計，確保API端點明確，並使用適當的HTTP方法（如POST用於創建，PUT用於更新）。 設計清晰的請求和響應模型，以確保客戶端能夠理解預期格式。 2.數據驗證 在伺服器端進行嚴格的數據驗證，確保接收到的數據符合預期格 ...
所有分類