ubuntu16.04升級python3.7.1教程

1. 準備

   sudo apt-get install --reinstall zlibc zlib1g zlib1g-dev 
   sudo apt-get install libffi-dev libssl-dev libreadline-dev -y
   

2. 安裝

   使用python官方站點的以下命令下載Python。您也可以下載最新版本代替下麵指定的版本

   #下載python3.7.1
   sudo wget https://www.python.org/ftp/python/3.7.1/Python-3.7.1.tgz
   #解壓
   sudo tar xzf Python-3.7.1.tgz
   

3. 進入解壓目錄

   cd Python-3.7.1/

4. 4、建立安裝的目錄

   sudo mkdir -p /usr/local/python3

5. 編譯安裝

   #執行這步是後面最好加上 --enable-optimizations 會自動安裝pip3及優化配置
   #./configure:配置安裝環境
   #--prefix=/usr/local/python3:指向安裝路徑
   #--enable-optimizations:安裝pip3及優化配置
   ./configure --prefix=/usr/local/python3 --enable-optimizations
   make
   sudo make install
   

6. 刪除軟連接

       >     #先執行查看版本，如果有則證明軟鏈接已存在，需要先刪去以前的再重新建立
       >     #這裡表明我已有python3的軟鏈接而沒有pip3的軟鏈接所以需要刪除python3的軟鏈接重新建立
       > [email protected]:~/Python-3.7.1$ python3 -V 
       
       > Python 3.5.2
       > [email protected]:~$ pip3 -V 
       > bash: /usr/lib/command-not-found:/usr/bin/python3: bad interpreter: No such file or directory
       > apt install python3-pip 
       > rm -rf /usr/bin/python3  
       > rm -rf /usr/bin/pip3
   

7. 建立新的指向python3.7的軟鏈接

   添加python3的軟鏈接

   ln -s /usr/local/python3/bin/python3.7 /usr/bin/python3
   

   添加 pip3 的軟鏈接

   ln -s /usr/local/python3/bin/pip3.7 /usr/bin/pip3
   

8. 檢測版本

   [email protected]:~$ python3 -V
   Python 3.7.1

   [email protected]:~$ pip3 -V
   pip 10.0.1 from /usr/local/python3/lib/python3.7/site-packages/pip (python 3.7)

9. 複製‘lsb_release.py’模塊

   將其複製到設置python3.7的系統模塊載入位置，也就是報錯處subprocess.py所在的目錄

   sudo cp  /usr/lib/python3/dist-packages/lsb_release.py /usr/local/python3/lib/python3.7/
   

10. 缺少‘lsb_release.py’模塊：

[【問題解決】subprocess.CalledProcessError: Command ‘(‘lsb_release‘, ‘-a‘)‘ returned non-zero exit status 1][1]
[1]: https://blog.csdn.net/p1279030826/article/details/111573774