高通Audio中ASOC的codec驅動_ZenDei技術網路在線

ASOC的出現是為了讓codec獨立於CPU，減少和CPU之間的耦合，這樣同一個codec驅動就無需修改就可以匹配任何一款平臺。在Machine中已經知道，snd_soc_dai_link結構就指明瞭該Machine所使用的Platform和Codec。在Codec這邊通過codec_dai和Pl ...

繼上一篇文章：高通Audio中ASOC的machine驅動（一）

ASOC的出現是為了讓codec獨立於CPU，減少和CPU之間的耦合，這樣同一個codec驅動就無需修改就可以匹配任何一款平臺。

在Machine中已經知道，snd_soc_dai_link結構就指明瞭該Machine所使用的Platform和Codec。在Codec這邊通過codec_dai和Platform側的cpu_dai相互通信，既然相互通信，就需要遵守一定的規則，其中codec_dai和cpu_dai統一抽象為struct snd_soc_dai結構，而將dai的相關操作使用snd_soc_dai_driver抽象。同時也需要對所有的codec設備進行抽象封裝，linux使用snd_soc_codec進行所有codec設備的抽象，而將codec的驅動抽象為snd_soc_codec_driver結構。所有簡單來說，Codec側有四個重要的數據結構: struct snd_soc_dai，struct snd_soc_dai_driver，struct snd_soc_codec，struct snd_soc_codec_driver。

1、Codec代碼分析：

1.1 找到codec的代碼：

如何找到codec的代碼呢？答案是通過machine中的snd_soc_dai_link結構:

 1 {
 2         .name = LPASS_BE_TERT_MI2S_TX,
 3         .stream_name = "Tertiary MI2S Capture",
 4         .cpu_dai_name = "msm-dai-q6-mi2s.2",
 5         .platform_name = "msm-pcm-routing",
 6         .codec_name     = MSM8X16_CODEC_NAME,
 7         .codec_dai_name = "msm8x16_wcd_i2s_tx1",
 8         .no_pcm = 1,
 9         .be_id = MSM_BACKEND_DAI_TERTIARY_MI2S_TX,
10         .be_hw_params_fixup = msm_tx_be_hw_params_fixup,
11         .ops = &msm8x16_mi2s_be_ops,
12         .ignore_suspend = 1,
13 },

由dai_link中codec_name，可以知道我們的codec驅動在哪。

由高通Audio中ASOC的machine驅動中的匹配並註冊相應驅動的那一章分析可知，codec驅動代碼就是msm8x16-wcd.c這個文件；

2、查看codec的probe函數：

  1 static int msm8x16_wcd_spmi_probe(struct spmi_device *spmi)
  2 {
  3     int ret = 0;
  4     struct msm8x16_wcd *msm8x16 = NULL;
  5     struct msm8x16_wcd_pdata *pdata;
  6     struct resource *wcd_resource;
  7     int modem_state;
  8 
  9     dev_dbg(&spmi->dev, "%s(%d):slave ID = 0x%x\n",
 10         __func__, __LINE__,  spmi->sid);
 11 
 12     modem_state = apr_get_modem_state();
 13     if (modem_state != APR_SUBSYS_LOADED) {
 14         dev_dbg(&spmi->dev, "Modem is not loaded yet %d\n",
 15                 modem_state);
 16         return -EPROBE_DEFER;
 17     }
 18 
 19     wcd_resource = spmi_get_resource(spmi, NULL, IORESOURCE_MEM, 0);
 20     if (!wcd_resource) {
 21         dev_err(&spmi->dev, "Unable to get Tombak base address\n");
 22         return -ENXIO;
 23     }
 24 
 25     switch (wcd_resource->start) {
 26     case TOMBAK_CORE_0_SPMI_ADDR:
 27         msm8x16_wcd_modules[0].spmi = spmi;
 28         msm8x16_wcd_modules[0].base = (spmi->sid << 16) +
 29                         wcd_resource->start;
 30         wcd9xxx_spmi_set_dev(msm8x16_wcd_modules[0].spmi, 0);
 31         device_init_wakeup(&spmi->dev, true);
 32         break;
 33     case TOMBAK_CORE_1_SPMI_ADDR:
 34         msm8x16_wcd_modules[1].spmi = spmi;
 35         msm8x16_wcd_modules[1].base = (spmi->sid << 16) +
 36                         wcd_resource->start;
 37         wcd9xxx_spmi_set_dev(msm8x16_wcd_modules[1].spmi, 1);
 38     if (wcd9xxx_spmi_irq_init()) {
 39         dev_err(&spmi->dev,
 40                 "%s: irq initialization failed\n", __func__);
 41     } else {
 42         dev_dbg(&spmi->dev,
 43                 "%s: irq initialization passed\n", __func__);
 44     }
 45         goto rtn;
 46     default:
 47         ret = -EINVAL;
 48         goto rtn;
 49     }
 50 
 51 
 52     dev_dbg(&spmi->dev, "%s(%d):start addr = 0x%pa\n",
 53         __func__, __LINE__,  &wcd_resource->start);
 54 
 55     if (wcd_resource->start != TOMBAK_CORE_0_SPMI_ADDR)
 56         goto rtn;
 57 
 58     dev_set_name(&spmi->dev, "%s", MSM8X16_CODEC_NAME);
 59     if (spmi->dev.of_node) {
 60         dev_dbg(&spmi->dev, "%s:Platform data from device tree\n",
 61             __func__);
 62         pdata = msm8x16_wcd_populate_dt_pdata(&spmi->dev);
 63         spmi->dev.platform_data = pdata;
 64     } else {
 65         dev_dbg(&spmi->dev, "%s:Platform data from board file\n",
 66             __func__);
 67         pdata = spmi->dev.platform_data;
 68     }
 69 
 70     msm8x16 = kzalloc(sizeof(struct msm8x16_wcd), GFP_KERNEL);
 71     if (msm8x16 == NULL) {
 72         dev_err(&spmi->dev,
 73             "%s: error, allocation failed\n", __func__);
 74         ret = -ENOMEM;
 75         goto rtn;
 76     }
 77 
 78     msm8x16->dev = &spmi->dev;
 79     msm8x16->read_dev = __msm8x16_wcd_reg_read;
 80     msm8x16->write_dev = __msm8x16_wcd_reg_write;
 81     ret = msm8x16_wcd_init_supplies(msm8x16, pdata);
 82     if (ret) {
 83         dev_err(&spmi->dev, "%s: Fail to enable Codec supplies\n",
 84             __func__);
 85         goto err_codec;
 86     }
 87 
 88     ret = msm8x16_wcd_enable_static_supplies(msm8x16, pdata);
 89     if (ret) {
 90         dev_err(&spmi->dev,
 91             "%s: Fail to enable Codec pre-reset supplies\n",
 92                __func__);
 93         goto err_codec;
 94     }
 95     usleep_range(5, 6);
 96 
 97     ret = msm8x16_wcd_device_init(msm8x16);
 98     if (ret) {
 99         dev_err(&spmi->dev,
100             "%s:msm8x16_wcd_device_init failed with error %d\n",
101             __func__, ret);
102         goto err_supplies;
103     }
104     dev_set_drvdata(&spmi->dev, msm8x16);
105 
106     ret = snd_soc_register_codec(&spmi->dev, &soc_codec_dev_msm8x16_wcd,
107                      msm8x16_wcd_i2s_dai,
108                      ARRAY_SIZE(msm8x16_wcd_i2s_dai));
109     if (ret) {
110         dev_err(&spmi->dev,
111             "%s:snd_soc_register_codec failed with error %d\n",
112             __func__, ret);
113     } else {
114         goto rtn;
115     }
116 err_supplies:
117     msm8x16_wcd_disable_supplies(msm8x16, pdata);
118 err_codec:
119     kfree(msm8x16);
120 rtn:
121     return ret;
122 }

msm8x16_wcd_spmi_probe

SPMI匯流排是高通電源管理的一種規範，也就是通過PMU控制音頻（具體我也不夠瞭解，有待以後深入理解）

看看最重要的函數：

1 ret = snd_soc_register_codec(&spmi->dev, &soc_codec_dev_msm8x16_wcd,
2                      msm8x16_wcd_i2s_dai,
3                      ARRAY_SIZE(msm8x16_wcd_i2s_dai));

此函數通過snd_soc_register_codec函數註冊了wcd9320的codec，同時傳入了snd_soc_codec_driver和snd_soc_dai_driver結構。

 1 static struct snd_soc_codec_driver soc_codec_dev_msm8x16_wcd = {
 2     .probe    = msm8x16_wcd_codec_probe,
 3     .remove    = msm8x16_wcd_codec_remove,
 4 
 5     .read = msm8x16_wcd_read,
 6     .write = msm8x16_wcd_write,
 7 
 8     .suspend = msm8x16_wcd_suspend,
 9     .resume = msm8x16_wcd_resume,
10 
11     .readable_register = msm8x16_wcd_readable,
12     .volatile_register = msm8x16_wcd_volatile,
13 
14     .reg_cache_size = MSM8X16_WCD_CACHE_SIZE,
15     .reg_cache_default = msm8x16_wcd_reset_reg_defaults,
16     .reg_word_size = 1,
17 
18     .controls = msm8x16_wcd_snd_controls,
19     .num_controls = ARRAY_SIZE(msm8x16_wcd_snd_controls),
20     .dapm_widgets = msm8x16_wcd_dapm_widgets,
21     .num_dapm_widgets = ARRAY_SIZE(msm8x16_wcd_dapm_widgets),
22     .dapm_routes = audio_map,
23     .num_dapm_routes = ARRAY_SIZE(audio_map),
24 };

snd_soc_dai_driver結構:

 1 static struct snd_soc_dai_driver msm8x16_wcd_i2s_dai[] = {
 2     {
 3         .name = "msm8x16_wcd_i2s_rx1",
 4         .id = AIF1_PB,
 5         .playback = {
 6             .stream_name = "AIF1 Playback",
 7             .rates = MSM8X16_WCD_RATES,
 8             .formats = MSM8X16_WCD_FORMATS,
 9             .rate_max = 192000,
10             .rate_min = 8000,
11             .channels_min = 1,
12             .channels_max = 3,
13         },
14         .ops = &msm8x16_wcd_dai_ops,
15     },
16     {
17         .name = "msm8x16_wcd_i2s_tx1",
18         .id = AIF1_CAP,
19         .capture = {
20             .stream_name = "AIF1 Capture",
21             .rates = MSM8X16_WCD_RATES,
22             .formats = MSM8X16_WCD_FORMATS,
23             .rate_max = 192000,
24             .rate_min = 8000,
25             .channels_min = 1,
26             .channels_max = 4,
27         },
28         .ops = &msm8x16_wcd_dai_ops,
29     },
30 };

3、snd_soc_register_codec函數分析：

首先，它申請了一個snd_soc_codec結構的實例：

1 codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);

確定codec的名字，這個名字很重要，Machine驅動定義的snd_soc_dai_link中會指定每個link的codec和dai的名字，進行匹配綁定時就是通過和這裡的名字比較，從而找到該Codec的！

1 codec->name = fmt_single_name(dev, &codec->id);

然後初始化它的各個欄位，多數欄位的值來自上面定義的snd_soc_codec_driver的實例：

 1     codec->write = codec_drv->write;
 2     codec->read = codec_drv->read;
 3     codec->volatile_register = codec_drv->volatile_register;
 4     codec->readable_register = codec_drv->readable_register;
 5     codec->writable_register = codec_drv->writable_register;
 6     codec->ignore_pmdown_time = codec_drv->ignore_pmdown_time;
 7     codec->dapm.bias_level = SND_SOC_BIAS_OFF;
 8     codec->dapm.dev = dev;
 9     codec->dapm.codec = codec;
10     codec->dapm.seq_notifier = codec_drv->seq_notifier;
11     codec->dapm.stream_event = codec_drv->stream_event;
12     codec->dev = dev;
13     codec->driver = codec_drv;
14     codec->num_dai = num_dai;

在做了一些寄存器緩存的初始化和配置工作後，通過snd_soc_register_dais函數對本Codec的dai進行註冊：

1 /* register any DAIs */
2 ret = snd_soc_register_dais(dev, dai_drv, num_dai);
3 if (ret < 0) {
4         dev_err(codec->dev, "ASoC: Failed to regster DAIs: %d\n", ret);
5         goto fail_codec_name;
6 }

最後，它把codec實例鏈接到全局鏈表codec_list中：

1 mutex_lock(&client_mutex);
2 list_add(&codec->list, &codec_list);
3 mutex_unlock(&client_mutex);

至此，codec的註冊就分析完畢。

關於codec側驅動總結: 1. 分配名字為"codec_name"的平臺驅動，註冊。
2. 定義struct snd_soc_codec_driver結構，設置，初始化。 3. 定義struct snd_soc_dai_driver結構，設置，初始化。 4. 調用snd_soc_register_codec函數註冊codec。