Ubuntu下安裝Docker CE

官網配置步驟：https://docs.docker.com/install/linux/docker-ce/ubuntu/#install-docker-ce-1

安裝Docker社區版倉庫

1. Update the apt package index:

   $ sudo apt-get update
   

2. Install packages to allow apt to use a repository over HTTPS:

   $ sudo apt-get install \
       apt-transport-https \
       ca-certificates \
       curl \
       software-properties-common
   

3. Add Docker’s official GPG key:

   $ curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -

4. Use the following command to set up the stable repository. You always need the stable repository, even if you want to install builds from the edge or test repositories as well. To add the edge or test repository, add the word edge or test (or both) after the word stable in the commands below.

   $ sudo add-apt-repository \
      "deb [arch=amd64] https://download.docker.com/linux/ubuntu \
      $(lsb_release -cs) \
      stable"
   

安裝Docker社區版

1. Update the apt package index.

   $ sudo apt-get update
   

2. Install the latest version of Docker CE, or go to the next step to install a specific version:

   $ sudo apt-get install docker-ce

　　 3.Verify that Docker CE is installed correctly by running the hello-world image.

　　　　$ sudo docker run hello-world

截圖如下