屬性掃描完成之後, 就可以開始屬性註入了.

代碼塊:

org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory#doCreateBean

boolean earlySingletonExposure = (mbd.isSingleton() && this.allowCircularReferences &&
        isSingletonCurrentlyInCreation(beanName));
if (earlySingletonExposure) {
    if (logger.isTraceEnabled()) {
        logger.trace("Eagerly caching bean '" + beanName +
                "' to allow for resolving potential circular references");
    }
    //這裡創建了一個匿名的 ObjectFactory 實現類, 他是一個工廠, 可以用來獲取對象
    //addSingletonFactory中, 將這個工廠放到 singletonFactories 中去了. singletonFactories 是spring的三級緩存
    addSingletonFactory(beanName, () -> getEarlyBeanReference(beanName, mbd, bean));
}

// Initialize the bean instance.
Object exposedObject = bean;
try {
    //設置屬性，非常重要
    populateBean(beanName, mbd, instanceWrapper);
    //執行後置處理器，aop就是在這裡完成的處理
    exposedObject = initializeBean(beanName, exposedObject, mbd);
}

這裡只看 populateBean() 方法

org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory#populateBean

protected void populateBean(String beanName, RootBeanDefinition mbd, @Nullable BeanWrapper bw) {
    if (bw == null) {
        if (mbd.hasPropertyValues()) {
            throw new BeanCreationException(
                    mbd.getResourceDescription(), beanName, "Cannot apply property values to null instance");
        }
        else {
            // Skip property population phase for null instance.
            return;
        }
    }

    // Give any InstantiationAwareBeanPostProcessors the opportunity to modify the
    // state of the bean before properties are set. This can be used, for example,
    // to support styles of field injection.
    // 需不需要spring來設置屬性
    // 實例化之後的 bean的後置處理器
    // org.springframework.beans.factory.config.InstantiationAwareBeanPostProcessor#postProcessAfterInstantiation
    if (!mbd.isSynthetic() && hasInstantiationAwareBeanPostProcessors()) {
        for (BeanPostProcessor bp : getBeanPostProcessors()) {
            if (bp instanceof InstantiationAwareBeanPostProcessor) {
                InstantiationAwareBeanPostProcessor ibp = (InstantiationAwareBeanPostProcessor) bp;
                //如果返回為 false, 則會終止屬性註入
                if (!ibp.postProcessAfterInstantiation(bw.getWrappedInstance(), beanName)) {
                    return;
                }
            }
        }
    }

    PropertyValues pvs = (mbd.hasPropertyValues() ? mbd.getPropertyValues() : null);

    int resolvedAutowireMode = mbd.getResolvedAutowireMode();
    //如果給一個類設置了 : AUTOWIRE_BY_NAME 和 AUTOWIRE_BY_TYPE, 那麼類中的屬性, 會根據規則自動註入, 而不需要@Autowired或@Resource了
    //預設情況下, 是 AUTOWIRE_NO, 所以這裡預設是不執行
    if (resolvedAutowireMode == AUTOWIRE_BY_NAME || resolvedAutowireMode == AUTOWIRE_BY_TYPE) {
        MutablePropertyValues newPvs = new MutablePropertyValues(pvs);
        // Add property values based on autowire by name if applicable.
        if (resolvedAutowireMode == AUTOWIRE_BY_NAME) {
            autowireByName(beanName, mbd, bw, newPvs);
        }
        // Add property values based on autowire by type if applicable.
        if (resolvedAutowireMode == AUTOWIRE_BY_TYPE) {
            autowireByType(beanName, mbd, bw, newPvs);
        }
        pvs = newPvs;
    }

    boolean hasInstAwareBpps = hasInstantiationAwareBeanPostProcessors();
    //深度引用檢查, 引用再引用
    boolean needsDepCheck = (mbd.getDependencyCheck() != AbstractBeanDefinition.DEPENDENCY_CHECK_NONE);

    PropertyDescriptor[] filteredPds = null;
    if (hasInstAwareBpps) {
        if (pvs == null) {
            pvs = mbd.getPropertyValues();
        }
        for (BeanPostProcessor bp : getBeanPostProcessors()) {
            if (bp instanceof InstantiationAwareBeanPostProcessor) {
                InstantiationAwareBeanPostProcessor ibp = (InstantiationAwareBeanPostProcessor) bp;
                //這裡也是調用的實例化後的後置處理器, 只是調用的方法不一樣
                PropertyValues pvsToUse = ibp.postProcessProperties(pvs, bw.getWrappedInstance(), beanName);
                if (pvsToUse == null) {
                    if (filteredPds == null) {
                        filteredPds = filterPropertyDescriptorsForDependencyCheck(bw, mbd.allowCaching);
                    }
　　　　　　　　　　　　//這裡的 postProcessPropertyValues 是一個過時方法
                    pvsToUse = ibp.postProcessPropertyValues(pvs, filteredPds, bw.getWrappedInstance(), beanName);
                    if (pvsToUse == null) {
                        return;
                    }
                }
                pvs = pvsToUse;
            }
        }
    }
    if (needsDepCheck) {
        if (filteredPds == null) {
            filteredPds = filterPropertyDescriptorsForDependencyCheck(bw, mbd.allowCaching);
        }
        checkDependencies(beanName, mbd, filteredPds, pvs);
    }

    if (pvs != null) {
        applyPropertyValues(beanName, mbd, bw, pvs);
    }
}

上面的註釋裡面說到, spring預設使用 AUTOWIRE_NO 模式, 那屬性註入方法  autowireByName 和 autowireByType 都沒進去.

也沒看到別的屬性註入方法了, 那麼, 這裡是怎麼註入的呢?

要想弄明白這個問題, 得先弄明白裡面調用了兩次後置處理器的方法, 都幹了些什麼.

postProcessAfterInstantiation

https://www.cnblogs.com/elvinle/p/13384114.html

postProcessProperties

 https://www.cnblogs.com/elvinle/p/13384328.html

postProcessProperties 就是進行 @Autowired 和 @Resource 註入的.

註意到這裡, AUTOWIRE_BY_NAME  和 AUTOWIRE_BY_TYPE 是在 他們之前 執行的 .